Choosing a set of bedding that suits your needs can add a finishing touch to the overall layout of the bedroom, but if the washing and maintenance methods are not appropriate, it may cause some minor problems. Here are some common washing and maintenance knowledge.
1. Generally speaking, a bed needs three sets of bedding to be used in turn, and it needs to be cleaned once every 1-2 months. Before the first use, it can be rinsed once in the water. It can wash off the surface of the pulp and the parts that may not be dyed. It will be soft to use and will not fade easily in the future.
2, bedding washing, in addition to the special material and indicate that it can not be washed (such as silk), in general, you can first pour the neutral detergent into the water of the washing machine, the water temperature should not exceed 30 ° C, until the detergent is completely dissolved Then put in the bedding and do not soak for more than 10 minutes. Because the water temperature is too high or the detergent does not dissolve on average, soaking for too long may easily cause unnecessary fading. At the same time, the light-colored products should be washed separately from the dark products during washing to avoid dyeing. After cleaning, dry it in the outdoor ventilation. If you want to use the dryer, please use low temperature drying. The temperature should not exceed 35 °C to avoid excessive shrinkage.
In short, carefully read the washing instructions of the product before cleaning, such as some decorative products, some luxury multi-piece sets, must pay attention to remove the lace or pendant decoration before washing, to avoid damage.
3, please clean before collection, thoroughly dry, folded neatly, and put a certain amount of mothballs (can not be in direct contact with the product), should be stored in the dark, low humidity, well ventilated place. Long-term unused products can be dried in the sun before being reused, so that they can be restored to fluffy.
4, a few points need special attention:
1 linen products can not be rubbed and twisted when washing (because the fibers are brittle, easy to fluff, affecting the appearance and life)
2When collecting cotton and hemp products, pay attention to keep the environment clean and prevent mildew. Light and dark products should be stored separately to prevent shadowing and yellowing.
3 white silk products can not be placed in the chopsticks or placed in a coffin box, otherwise it will yellow.
4The skin products can be aired before being collected, but they should not be exposed to direct sunlight (easy to change color), or they can be completely dried in the ventilated place. In order to increase the flexibility of the leather, a thin layer of glycerin can be applied to the surface with a soft cloth.
5 In addition to the single-hole fiber pillow, other can be washed, but because of its thickness, it must be ensured that it is fully air-dried, so that it is completely dry without affecting reuse. It is best to use a quilt cover to avoid the trouble of washing.
Printed Fabric,Printed Cotton Fabric,Cotton Fabric
Hanlin Textile Co., Ltd. , http://www.hbgarmentfabric.com