In general, impregnated polyurethanes appear pinholes on the surface of the coating during the production process. The reasons are as follows: 1. The amount of antifoaming agent is not enough, and the amount of antifoaming agent needs to be increased at this time; The quality of the foaming agent is too bad. At this time, the defoamer needs to be replaced. 3. The viscosity of the slurry is too high and should be adjusted to between 0.2~0.4Ps. 4. The static degassing time of the slurry is not enough. when the need to extend the slurry bubble standing off time; 5 mass difference fabric itself, can be solved by a method of replacing a base fabric;. impregnation tank 6 hours, irrational structure, then impregnating tank must be replaced. · The old shoes at home are like this to transform big spikes · Old shoes don't stupidly throw away so that the shoes "open" Put a physical insurance on your shoes · How to clean the matte surface of the shoes? · Breathable, antibacterial, deodorizing socks with it to avoid off shoes ·Sports shoes's little tail actually has these 3 functions you certainly don't ·High-heeled shoes audio sound? 4 coups to ease you learn a few ·How to choose shoes during pregnancy? Flat shoes are not safe What should I do if my shoes become moldy ·Wearing these shoes in the summer will hurt you
Metal Badge,Metal Medal,Name Plate Co., Ltd. , http://www.nbtsjd.com