HC Coatings News: At the beginning of 2017, the General Administration of Quality Supervision, Inspection and Quarantine announced the list of “National Key Quality Supervisionâ€, in which the risk level of wooden furniture and children's furniture is Grade I (Class I risk products are closely related to consumers, domestic market circulation) Large, there are many cases of product quality and safety problems, involving products of specific consumer groups); the sanitary ware, ceramic tiles, drainage fittings, and faucets have a risk level of II (Class II risk products refer to large domestic market circulation, product quality and safety) The problem case is medium, and the product with low qualification rate is supervised. The risk grade of home textile products is grade II and III. The environmental protection of furniture products is imminent!
Below, the reporter has compiled the blacklist of quality inspections in recent years, as well as the product categories on the list, and hopes to alert the peers!
2016 furniture unqualified blacklist
On May 24, 2017, the Beijing Industrial and Commercial Bureau announced the list of unqualified samples of furniture products sold in the Beijing market in 2016. There are 26 kinds of products produced by the nominally Zhengding County St. Odda Furniture Factory. Among them, 5 manufacturers such as Beijing Zhihan Furniture Co., Ltd. are not only unqualified, but cannot contact or reject the letter according to the nominal address! (Click to view larger image)
(Beijing unqualified list of furniture sampling, source: Beijing Industrial and Commercial Bureau official website)
1. The bedside table is sampled, and 21 samples are unqualified.
In the 26 unqualified samples taken this time, the number of times the bedside table was shot was 21 times. Most of them are unqualified for formaldehyde release, and some are for woodworking requirements.
Usually, the bedside table is sold as a matching product of the bed. The quality of the product is often overlooked by consumers. Many unscrupulous merchants make a fuss about the bedside table according to the psychology of the consumer, or do not pay attention to the quality of the bedside table. Put a "gas cabinet" on the consumer's pillow.
2, push-pull components, 26 samples of 15 samples failed
Among the unqualified products announced in this announcement, no matter whether the bedside cabinet, the three drawers, or the movable push cabinet have the problem of unsatisfactory strength of the push-pull members, 15 of the 26 samples failed, and the unqualified frequency exceeded 50%.
In cabinet products, push-pull components are the most frequently used components of consumers, directly affecting the consumer experience, and should be the most important part of the cabinet products, but it has become the main factor of failure.
3, formaldehyde emission, 26 samples exceeded 11
In the sampling of furniture products, whether it is a sofa, a mattress, or other wood products, the excessive emission of formaldehyde has become an old, large, and difficult problem. In this sampling inspection, the problem of formaldehyde emission exceeded 11 times.
Formaldehyde is usually used as a binder in the interlayer of wood-based panels, and formaldehyde is released for up to 3 to 15 years. The main reason for the excessive formaldehyde in furniture is that the raw materials are not tightly controlled. In order to reduce the cost, some enterprises purchase inferior plates or adhesives containing formaldehyde components, and the quality of the products cannot be guaranteed.
Four major categories of products, quality check blacklist "frequent customers"
There are many types of furniture products involved. In addition to the country, cities and towns organize annual inspections of furniture products. From the results of sampling in recent years, some categories that often appear in the unqualified black list have gradually reflected the "contour".
Bathroom products: quality and safety hazards
Every year, the quality inspection operation, the sanitary industry is constantly turbulent, the biggest test is that the product quality does not meet the national mandatory standards, or does not meet the standard level of self-declaration and commitment of the enterprise, there are major quality and safety risks. In January 2017, the General Administration of Quality Supervision, Inspection and Quarantine conducted a random inspection of 200 batches of ceramic sheet sealing nozzles produced by 200 enterprises in 13 provinces (cities) including Beijing, Hebei, Liaoning, Shanghai, Jiangsu, Zhejiang, Anhui and Fujian. After inspection, 36 batches of products produced by 36 companies were unqualified, and the detection rate of unqualified products was 18%.
In the second half of last year, quality inspections also involved bathroom products. In August 2016, the official website of Shanghai Quality and Technical Supervision Bureau announced the results of the quality supervision and inspection of Shanghai shower products in 2016. This time, 20 batches of products were randomly selected. After inspection, the failure rate was 20%. In September 2016, the official website of the General Administration of Quality Supervision, Inspection and Quarantine notified the special inspection of the national supervision of smart toilet product quality in 2016, and randomly selected 68 batches of products produced by 58 enterprises, of which 12 batches were unqualified, and the pass rate of product sampling was 17.6%.
Wooden furniture: surface physical and chemical properties, mechanical properties, formaldehyde emission are common unqualified items
The household products that are ranked first in the inspection are wooden furniture. In March 2017, the Beijing Municipal Bureau of Quality and Technical Supervision announced the results of quality supervision and inspection of 13 kinds of daily consumer goods such as furniture. The results showed that many furniture brand products were unqualified. The unqualified items mainly involved surface physical and chemical properties, mechanical properties and formaldehyde release. the amount.
Half a year ago, the official website of the Beijing Municipal Bureau of Quality and Technical Supervision released the announcement of the results of the nationwide quality supervision and joint inspection of 8 kinds of products, including children and infant clothing in the production area of ​​the city (No. 32, 2016). According to the announcement, this random inspection involved 196 batches of products produced by 196 companies, of which 8 batches were unqualified, wooden furniture products became “hardest hitâ€, and 5 batches of unqualified products.
Children's furniture: frequent local structural safety issues
"Children's Day" is approaching, and it is believed that the children's furniture market will also become the focus of attention. Children's furniture is also a "regular guest" in the black list of the industrial and commercial and quality inspection departments.
Taking the two sampling inspections last year as an example, on January 22, 2016, the General Administration of Quality Supervision, Inspection and Quarantine announced the results of the national supervision and spot check on the quality of children's furniture products. 13 products did not meet the standard requirements, of which 9 children's furniture was listed because the warning signs were not up to standard, accounting for nearly 70%.
On September 14, 2016, the official website of the Beijing Municipal Administration of Industry and Commerce released the results of the quality inspection. It was stated that in 2016, the Beijing Municipal Administration for Industry and Commerce conducted a random inspection of the children's furniture products sold in the Beijing market. The results showed that there were problems with the five children's furniture.
Home textile supplies: raw materials are the source of problems
The blacklist of home textile products is also common. From the results of the quality inspections of the provincial industrial and commercial bureaus in the past six months: In December 2016, the Shanghai Municipal Administration of Industry and Commerce concentrated on law enforcement forces to conduct market inspections and quality inspections on 90 batches of home textile products of 46 brands. After testing, 24 batches were unqualified, and the unqualified detection rate was 26.7%. The unqualified items are mainly decomposable carcinogenic aromatic amine dyes, water washing dimensional change rate, pH value, color fastness and fiber content.
On February 22, 2017, the Liaoning Provincial Administration for Industry and Commerce released the results of the quality inspection of bedding products in 2016, and notified 53 batches of unqualified products. The main unqualified items included poor color fastness and poor breaking strength. The shrinkage size is not up to standard, and the fiber content and instructions for use are not acceptable.
On March 15, 2017, the official website of the Anhui Provincial Administration for Industry and Commerce issued a notice stating that the bureau conducted a provincial quality spot check on the textile products in the province according to law. This random inspection examined a total of 35 sets of bedding, of which 16 were qualified and 19 were unqualified, and the unqualified rate was as high as 54.3%.
Shopping Tips: Safety and environmental protection furniture should look at the time
The quality of furniture will not only affect the overall style and visual effect of the living room, but also affect our daily life and physical health. How to choose green and high-quality furniture has become a problem that plagues every consumer.
1, the choice of furniture sheet
There are two types of furniture sheets on the market: solid wood and artificial wood. There are three types of wood-based panels, plywood, particleboard and fiberboard. Among them, plywood has the best strength and volume stability, and the processing technology is superior to particleboard and fiberboard, so it is the most widely used. Hard fiberboard has the advantage of not using glue or less glue, but environmental pollution is a serious problem in the fiberboard industry. Particleboard is the simplest manufacturing process with the least energy consumption, but requires a lot of adhesive.
2, the choice of furniture paint
The choice of paint surface is divided into two types, one is the painting process, the other is the quality of the paint and environmental protection. First of all, to introduce the painting process, the most common now is the piano baking process, the biggest difference between piano paint and ordinary paint and stability, if there is no intentional damage, the paint is still smooth and delicate after many years, in the brightness and density of brightness The two are also far apart.
3. Is the furniture structure firm?
Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating that the quality is good; if the sound is dumb, there is a murmur in the slap, indicating that the eyes are combined Not tight, the structure is not strong. The table can be shaken by hand to see if it is stable.
The sofa can sit and sit. If you sit on the move, you will slam, and when you shake it, it will be nailed and it will take a long time. Square tables, tables, chairs and other legs should have four triangular clips to fix the function. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
4, veneer furniture seams are not strict
Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is bulging, blistering, not tight seams, and at the same time pay attention to the inspection when checking. The ash veneer veneer furniture is more susceptible to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones.
5, the choice of tempered glass and marble
Both have their own advantages. The marble surface will cost 100 to 200 yuan more than the tempered glass surface. You can buy it according to your favorite and matching effect. Marble is divided into natural marble and artificial marble. The former is much more expensive than the latter, but don't think that natural marble is good. First of all, natural is more fragile than artificial ones, and needs frequent maintenance.
6, mirror furniture should take a photo
Choose furniture with mirrors, such as dressing table, mirror, and dressing mirror. Take care of it and see if the mirror is deformed. Check if there is lining paper and backboard at the mercury in the back of the mirror. Qualified, no paper, no, otherwise the mercury will be worn away.
7. Is the fitting installation reasonable?
Check the door lock, the switch is not working? Large cabinets should be equipped with 3 hidden hinges. Some can only be installed with 2, and the top 3 silks, some cut corners, only one screw, will be used. So when you choose furniture, check the installation of the accessories.
Editor in charge: Wang Qian 5
Our business is likewise One of the Powerful Business In the Stainless Steel Bar area With concerning 15 years.
As one of the leading foreign trade entrances of Chinese 304 stainless steel round bar market, basing on a foundation of mutual benefit and win-win concept.
Our firm has actually established friendly and considerable business collaboration in overseas market, providing ideal support to the development of the business.
Our stainless steel square bar collection consist of Hot and Cold Rolled 200, 300, 400 series, with brand names like TISCO, LISO, Bao Steel, Tsingshan, Wuhang, ESS, and so on, the types consist of 316 stainless steel round bar, coil, sheet, pole, strip, along with some semi-finished item like circle, pre-pressed sheet, and so on.
We have been provided ISO9000/14000 because year 2005. We are specifically solid in South-east Asia market, as well as we have actually expanded to be an excellent distributor in Africa, Middle East location as well as some European countries.
Our 316 stainless steel rod service always adheres to 4 organization concepts: top quality product to win the marketplace; affordable price to bring in customers; excellent service to obtain reputation; well-known brand name to promote value. We are looking forward to cooperate with you.
316 stainless steel rod, 304 stainless steel round bar, stainless steel square bar, 316 stainless steel round bar, stainless steel rounds
Ningbo Ningshing Trading Group Inc. , https://www.ningshingonline.com