To identify the authenticity of a jeans fabric, if it is only identified from some accessories such as buttons and leather cards, it is really inaccurate.
These are not very technical things. A lot of people can do it. So the key is to work hard on fabrics and wash water.
Washing water is simple, but it is difficult to do. Xiao Bian talks about washing water to everyone~
1, the cat must: use sandpaper to wipe out a trace in the pants. Then sprayed with potassium permanganate (commonly known as: stirrup), and then into the industrial washing machine, and finally baked out. This is just an introduction to the process. It will also be different because of the difference between the required effect and other reasons, the temperature of the process and the washing, the need for foaming resin, etc.
2, hand rub: use sandpaper in the pants to wipe out a large or small area. Then spray potassium permanganate, put it into an industrial washing machine, and then dry it. Hand rubbing is a fine task. It looks simple, but it needs experience and skills. In particular, with the coordination of potassium permanganate, a good hand rub evenly uneven jeans, natural is not natural, it is really a test of the skills of hand rubbing the master. Rubbing the edges or rubbing lightly on the edges of the hand, potassium permanganate sprays light or heavy, evenly uneven, and can affect the overall trousers.
3. Crush: This is the fold that we usually see. To do this, the pants must first be soaked in resin, then the high-pressure steam iron is used to press out the wrinkles and then put into a high temperature oven. The soaking of the resin is also more complicated, the soaking time is short, the effect is difficult to come out, and after a few times it is easy to subside. Soaking for a long time, the fabric will be relatively brittle, tearing by hand, you can tear. It is usually judged whether the resin is soaked or not, that is, where the trousers are torn or creased.
4, Zhahua: Zhahua is actually an irregular white line we see in the pants, looks like a lightning effect. To do this is to fold the leg with a high elastic rubber band (also with many substitutes) and fasten it in an industrial washing machine. After washing it out several times, the exposed part will turn white. Thus there is an irregular white line.
5. Grinding: Many jeans that look like white or light-colored fabrics do not have white or light colors. That is the effect after manual treatment. To make the overall trousers a light-colored effect, it is necessary to wipe the entire trousers with sandpaper or a special tool and then spray with potassium permanganate. After washing it out, it became a light-colored effect. If you look through the back pocket or some hidden area, you can see the original color of the trouser fabric, because there is no rubbing and spray.
6. Friction: Some strips are worn out and ground with some small electric tools. Some other things that are worn out are simply knifed, and cutting and grinding are very skillful. Some of them are made with tools. There is no more introduction here.
The above six kinds of water washing effects are more common, and most of the washing water comes from handwork. Because some jeans have a lot of washing effect, they are very complicated. At this stage there is no substitute for artificial machines. Therefore, in addition to the price factor of fabrics, the effect of washing water can also reflect the value of a pair of jeans. When it is necessary to wash the water well.
Washing water is a very professional skill. Sometimes it takes some talent. Some wash masters did not improve for several decades. Some people did very well in 5 or 6 years. A good wash master is very much in demand, and the salary is quite high.
There are no specific standards or procedures for identifying the quality of wash water. More is based on experience and intuition. As long as you think this pants looks good, naturally. Then the washing of this trousers is successful in your eyes. It is good. If you don't feel good, it is a failure.
For more content, please follow this site
Custom lapel pins are a timeless item that has proven effective in promotion and trade for decades. They are collected, traded, given away, awarded and so many other unique uses. There really is no limitation.
Custom lapel pins make excellent gifts and awards.Thousands of designs: Custom metal badge,Personalized metal badge, football metal badge,basketball pin badge, and other sports badge,hospital promotional badges, different printing badges, different plating badges,cheap and luxury badges, lapel pin, collar pin etc...
They look like fine jewelry and are worn with pride to show group or team affiliation. Order metal lapel pins to use at events, fund-raisers, conventions, trade shows, graduations, and for corporate identity or customer relations purposes.
Custom Metal Badge,Metal Pin Badge,Custom Badges,Custom Enamel Pins
Shenzhen MingFengXing Art & Craft Products CO., LTD. , https://www.metallapelpin.com