1 Raw unsaturated polyester is a raw material extracted from petroleum, transparent and viscous liquid.
Resins with accelerators and curing agents can be added with different colorants, or other raw materials, such as wax, salt, sawdust, straw, etc., with different amounts of raw materials, at different concentrations, different temperatures, different rotation speeds, and special With the cooperation of accessories, it will produce ever-changing patterns. It is also an important material that can be used to imitation natural pearl shells, horns, fruits, wood grain, stone, marble and other natural regeneration buttons.
1: Plate: Pour the completely mixed resin into the rotating drum, commonly known as the rewind bucket or large caliber, and pour as many layers as needed. After about 30 minutes, the resin in the drum can be cut due to the chemical reaction. Into a plate, and then placed on the embryo flush machine, the button embryo out. A plate ran out of about 126 liters of 14L button embryos.
2: Bar material: The completely mixed glue is flowed into the waxed aluminum tube through a special oscillator, and the glue stick is pulled into a soft glue and pulled out of the glue stick in the aluminum tube. The slicing knife can cut 1300 every minute. 18L button knob embryo. Each stick can be cut into about 24 inches of button embryos.
3 All embryos or rods of blank embryos are soft and must be placed in hot water at 80 degrees for 10 hours to speed up the chemical reaction. The embryos are hard embryos after complete reaction.
4 automatic car processing machine button machine, you can once over the car, car and drilling, even if the lettering, carved flowers can be completed in one go. Ordinary four holes have a side and a button on the bottom of the car, which can engrave 100 grains per minute. The plates and bars are the same.
5 Polishing (grinding)
As the surface of the car and the bottom of the vehicle leave marks, it is necessary to put it into a water mill barrel. The slow-rotating water mill bucket is mainly filled with water and matte powder. This process takes ten hours. The button after water-milling is dumb-mist effect. If the lighting effect is to be brightened, the bamboo core and wax are mainly put in the barrel. This process takes 20 hours; or the small stones and stone powder are used in the water-polishing machine. To achieve the above effect, this process takes 15 hours.
Ordinary resin buttons are made in this way, and more beautiful buttons can be made with their own imagination.
The same resin as raw material can also be used as resin horn button, resin button, resin plate, etc. for more information. Welcome to China Button Industry Network
Pig Nubuck,Pig Nubuck Leather,Suede Nubuck,Black Nubuck
Dongguan Kingful Leather Co,; Ltd , https://www.kingfulleather.com